Spenza Epoxy Grout Stains Colorants are water proof fluoropolymer color sealer with a unique component epoxy. It also seals and protects the grout from dirt,stains & abrasion.
AREA OF APPLICATION
Indoor and outdoor grouting of tiles floors and walls. Also suitable for acid-resistant bonding and rapid setting of tiles, stone materials, concrete.
Restaurants, Hotels, Kitchens, Bathrooms, Lobbies, Swimming Pools, Showrooms, Shopping Malls, Multiplexes, Laboratories, Food & Breweries industries, Pharma Industries, Operating Theaters, Hospitals, Clinics, Production, Storage Workshops etc.
PREPARING THE JOINTS
The joints must be dry, clean,free of dust. The excess adhesive should be removed while still fresh. Before grouting make sure that the installation the adhesive has set and released most of its moisture.
PREPARING THE MIX
Shake the Container of Part B and stir the Part A prior to mixing. Add all of the Part B to all of the Part A in a suitable, clean container and mix together thoroughly. if an electric drill mixer is used, mix at a slow speed(less than 300 rpm).Avoid entraining air by mixing at very high spped or by over mixing. Use the paste within 10-15 minutes from mixing.
APPLYING THE EPOXY
Spread Spenza epoxy with the appropriate float, making sure the joints are completely filled. Use the same float, but on edge, to remove excess grout.Clean the tiles with wet sponge after 10 min.
Acid & Oil stain resistant
Anti Fungal & Anti bacterial
Non-cracking or powdering
Resistant to certain chemicals
Easy to Sterilize, clean and maintain
High bond Strength
Available in range of colours
Spenza Epoxy Coverage